Models • • • • • Contents • About This Guide • • Icon Descriptions • Online Resources • Copyright and Trademarks • • Chapter 3: Connecting the Switch 8 • Chapter 4: Conguration Using the Console Interface 10 • • • Appendix B: Windows Help 63 • Appendix C: Downloading using Xmodem 64 • Appendix D: Glossary 66 Appendix E: Specications 70 Appendix F: Warranty Information 75 • Appendix G: Regulatory Information 77 • Introduction • • Chapter 1: Introduction • • SRW2048 • • • The Back Panel • • • Connecting the Switch • • Chapter 3: Connecting the Switch • Before You Install the Switch.
Downloading using Xmodem Appendix D. Download Software and a message will appear. Firmware Update Failed / Can't Access SRW2024. Downloading code using XMODEM. USER GUIDE BUSINESS SERIES WebView Switches Model: SRW2048, SRW2024, SRW2016, SRW248G4, SRW224G4 About This Guide About This Guide Icon Descriptions While. Select  Download Software and a message will appear Downloading code using XMODEM with characters running across the screen. Linksys SRW2040 Switch - corrupt firmware not able to restore. Downloading code using XMODEM. I had the same with a SRW2024. Downloading code using XMODEM. 10Gb Ethernet. Downloading code using XMODEM. Have an SRW2024 that I was updating. Switch software.
This is useful if, for example, the web interface keeps resetting the connections. Upgrading the firmware requires first updating the boot code, and the regular console in the earlier firware doesn’t have support for flashing the boot code. However, there is a hidden IOS-like cli available, that makes it possible to upgrade the boot code over tftp. An additional benefit is that it is much faster than using xmodem. The steps • Setup a tftp server on your machine, serving the files srw2024_16_boot-101.rfb and ls20xx-12230.ros (download from ) • Connect your computer to the switch using ethernet and serial cables.
• Boot the switch. • Log into the console. • On the new promt, type lcli and press enter. • To upgrade the boot code, type copy tftp:// /srw2024_16_boot-101.rfb boot • Then upgrade the firmware: copy tftp:// /ls20xx-12230.ros image • Lastly, restart the switch: reload That’s it. As an aside, please note that the web interface only works in Internet Explorer, so if it seems like it doesn’t work, it’s probably because your’re using another browser.