Download Free Delta 31-255X Manual

Download Free Delta 31-255X Manual

• Delta 31-255x, 18-36” drum sander Introduction - The Delta model 31-255x is an 18” x 36” drum sander with a two speed drive. The unit can be fitted with an optional outboard shaft that accommodates an accessory pneumatic drum for contour sanding. • Turn on the infeed belt conveyor by rotating the “Table Feed Knob” clockwise ¼ turn. Eicher Bedienungsanleitung Pdf Converter. The Hare Psychopathy Checklist Revised Pdf Viewer here. Place stock onto the infeed table and guide it under the pressure rollers. Listen carefully to the drum motor sound and reduce the infeed conveyor speed at the first indication of a slowing of the drum by rotating the dial counter-clockwise 1/8 turn. • The following is additional information for the supervisors benefit and is not included in the Shop Manual For Supervisors only: Changing the drum abrasive Standard abrasive is 80g or 120g Alumina-Zirconia belting which is blue. This belt will cause substantially less burning, especially when sanding Maple, Cherry or Mahogany because it tends to be self cleaning, runs cooler and tolerates pitch better than any other product.

Delta 31 255x X5 Review